Coolsculption cryo anti cellulite body sliming weight loss equipment

1. 4 handpiece can work together or separately. 4 air-pump, separately control the handle;
2. 3.5 inch color touch screen on handpiece;
3. Automatic filtration system, avoid handpiece blockage;
4. Advanced cooling system, 4 big TEC in one handpiece;
5. Heat before cooling. Better effective.

Description

 冷冻海报.jpg

 

Theory:

It uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat, when fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated through the body’s normal metabolism process, to eliminate unwanted fat.

 

Description:

Cryolipolysis, commonly referred to as "CoolSculpting" by patients, uses cold temperature to break down fat cells. The fat cells are particularly susceptible to the effects of cold, unlike other types of cells. While the fat cells freeze, the skin and other structures are spared from injury. This is one of the most popular nonsurgical fat reduction treatments, with over 450,000 procedures performed worldwide.

The goal of cryolipolysis is to reduce the volume of fat in a fatty bulge. Some patients may opt to have more than one area treated or to retreat an area more than once. The injured fat cells are gradually eliminated by the body over 4 to 6 months. During that time the fatty bulge decreases in size, with an average fat reduction of about 20 percent.

 

Function:

1. Fat reduction, cellulite removal, freeze fat, loss weight

2. Strengthen and tighten skin, body slimming and shaping

3. To promote and accelerate the body’s metabolism. 

UNT device Advantage:

1. 4 handpiece can work together or separately. 4 air-pump, separately control the handle.

2. 3.5 inch color touch screen on handpiece

3. Automatic filtration system, avoid handpiece blockage

4. Advanced cooling system, 4 big TEC in one handpiece

5. Heat before cooling. Better effective than single cooling.

 

Technical parameters  
Product model Cryo XCool Plus1
Handpiece Quantity 4 handpieces
Handle Size

Big: L210xW60XD55mm;

Middle: L160xW60xD55mm;

Small:L125*W45*D55mm.

Power 1500W
Vacuum Pressure 0-83Kpa
Vacuum Mode Vacuum Mode
Working Mode Synchronous working handle screen and the device interface
Working Time Hot: 0~20 min; Cool: 0~60min
Hot Temperature 20°C~30°C
Freezing Temperature -10°C~10°C
Cooling System Air+Water+Semiconductor cooling
Handle Screen 3.5 inch color touch screen
Screen 10.4 inch color touch screen
Read more!